Szukaj

Producenci

Pobierz cennik

TFRSP 10-cio kanałowy odbiornik FrSky kompatybilny z FUTABA FASST z wyprowadzonym sygnałem PPM oraz RSSI

producent::: FrSky
ocena:: 2.00

brutto: 219.00 zł
Powiadom znajomego

1. Introduction

1.1 Compatibility:

FASST 2.4G: Air Systems (7CH Mode/Multi Mode)

FrSky TF Modules: TF-8M, TF-14M

1.2 Specifications:

Number of Channels: up to 10 channels (CPPM for CH1~CH9, servo signal for CH5~CH10) 8

Operating Voltage Range: 3.5V~10V

Dimension: 53mm*30mm*11mm

Weight: 13.5g

2.Setup

Warning: DO NOT connect servos to channel 1 and channel 2, otherwise servos will get hot or even burn out.

Note: Increased duty means good signal reception, and vice verse.

2.1 Bind procedure:

Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. After the RED LED is off and GREEN LED is solid, the binding process is completed and working mode is activated.

2.2 Setting failsafe:

TFRSP supports failsafe function for all channels. Please kindly follow the steps below to set failsafe:

1) Bind the receiver first, and disable failsafe on the transmitter side;

2) Set failsafe at any required position on any channel;

3) Press briefly the F/S button of the receiver, the GREEN LED of the receiver will flash twice, indicating the failsafe is set up successfully.

If you do not need the failsafe function any more, just re-bind the receiver to set default failsafe mode.

Warning: Due to different failsafe settings between transmitter and FrSky TFRSP, users must disable failsafe on the transmitter side. Otherwise you will notice a jitter during a period of time on the channel you set failsafe.

2.3 LED status: